Sex Ceramic Thickness
For ceramic stove With a mattto eyewitness, we recommend the use of a laundry similar to the colour of the stove. When using a colour-corrected laundry, a small sample should first be taken and the surface cleared easily. If there is a dye, the surface of the stove shall be treated with a protective device (KIILTO COAT (Finland), ATLAS DELFIN (Poland)) which prevents the penetration of painted pigments into micropops that can be found on the surface of the stove with the match.
It is recommended that ATLAS SZOP (Poland) be used for the final treatment of the surface covered by the plate. It removes even old pollution and cement raids.
Prior to the application of any chemical products, give careful consideration to the manufacturer ' s instructions. It is recommended that chemical products should be checked before being used on a small area of ceramic coating.
The above funds are available in construction hypermarkets, construction markets. Detailed information on www. and www.
The ceramic decorative element (art. KYVC, KYVU) to the surface of the ceramic stove shall be accompanied by two-component cells on an epoxy basis. The decorative element shall be placed on the plug prior to mounting the stove on the wall. The plate on which the decorative element is attached shall be horizontal.
After applying the glue to the mounting surface of the decorative element, put the decorative element on a small-pressure plate. Hold the time specified in the adhesive instructions. After the drying of the glue, process the edge of the decorative element with a laundry similar to that of the stove.
Examine the instructions of the producers of side materials!
Environmental impacts are one of the factors that need to be taken into account in laying materials on the street. The outside of the building is constantly affected by weather conditions: freeze, rain, warming, high temperature heat. Frequent changes in temperature require materials of freeze, enduring, purified and retaining colour due to external factors. Therefore, it is perfectly legal that one of the most popular materials for the marking of facades, balconies and therras has become a ceramogenite.
The ceramic granite is one of the most solid materials, it has a high density and homogeneity, exceeding most classes of natural rock.
The homogeneous surface of the ceramogenite allows for temperature fluctuations and water effects, which are very important for Russia ' s climatic conditions.