Set The Ceramic Stove
The type of surface on which the stove will continue to be attached has a significant influence on the choice of “right” glue:
3 Necessary materials
Gross emulsion
Grunt is the foundation of the work. The grunt emulsion is based on a prepared base of brush or valley before equating solution or glue. In a porous surface, it strengthens it, creates a protective layer between the base and the glue, improves the clutch and the base.
Improved additives
Added to glue to improve adhesion, elasticity and waterproofness of glue. It's easier to level the grounds.
Clay
Two main species are produced: thin and fat. The former shall be applied to smoothly stacked walls, and the second may be used to plug even on the uneven surface.
Package mass
Makes it possible to fill the damage and to level the surface of the wall.
Switch laundry
Fills the stitches between the stoves, increasing the aesthetic and user quality of the stove.
4 Basis preparation
The plug always lays on dry, flat, clean, dehydrated, non-popular.
5 Determination of stove position
Bring the glue spaper to an area of about 1m2. Then pull a toothpaper over it so there's a horizontal sorcerer. |
| Press the first blade in the corner to which the plank and the vertical line are parties. Then glue the next plug, slightly turning it, until it's in the right position. In the same way, lay three or four rows of the remaining stoves until they are covered by the whole surface on which the glue is exposed. |
Between the tiles, establish remote crosses to ensure that their stitches are equally wide.
|
| Periodically, by means of a measuring plan and level, check whether the stove is exactly stacked. Speakers stoves with a little rubber hammer or squeezing them with wooden racks (the rack should cover several stoves). |
Put up another piece of glue and continue work. I'm going to finish the layout of the lower row of the stoves before pre-empting the horizontal. Remote crosses must be removed before the glue drys. |
Remove the excess glue between the tiles as they fit.
